Product SiteDocumentation Site

2.4. Source and destination configuration

2.4.1. Exchange To Zarafa Migration

Exchange Server configuration
Figure 2.3. ExchangeServer

In the Exchange Server Page enter either a pre created Outlook admin profile or enter the Exchange server name and admin user and password. By selecting either server address or profile radio-buttons. Click next.
Exchange Server Outlook profile configuration
Figure 2.4. ExchangeOutlookProfile

A connection test is performed, of which the progress is shown in status field at the bottom left. When the test is successful, the next page will be shown.
On the Zarafa Server Page the address of Zarafa Server instance should be provided, by default port 236 will be added. If another port is used this should be specified with a colon after the host name. Consequtively the admin users credentials should be supplied.
Zarafa Server configuration
Figure 2.5. Zarafa

Click next.
Again a connection test is performed, of which the progress is shown in status field at the bottom left. When the test is successful, the next page will be shown.

2.4.2. PST To Zarafa Migration

In the PST File Configuration Page click the Browse button and locate the location of where the .pst files are stored.
If none is chosen it defaults to the migrator program folder.
PST file configuration
Figure 2.6. PSTRead

In case unicode files are provided the migration tool should be told so by checking the appropriate check box. This supports large files, up to 20GB. This option can only be used if using Outlook 2003 and higher. If not ticked a maximum size of 2GB will be used.
Click Next
On the Zarafa Server Page the address of Zarafa Server instance should be provided, by default port 236 will be added. If another port is used this should be specified with a colon after the host name.
See Figure 2.5, “Zarafa”
Click next.
A connection test is performed, of which the progress is shown in status field at the bottom left. When the test is successful, the next page will be shown.

2.4.3. Zarafa To PST Migration

See Figure 2.5, “Zarafa”
Click next.
A connection test is performed, of which the progress is shown in status field at the bottom left. When the test is successful, the next page will be shown.
In the PST File Configuration Page click the Browse button and locate the location of where the .pst files are to be stored. If none is chosen the default location is the Migration Tool’s program folder.
Zarafa Server configuration
Figure 2.7. Zarafa

See Figure 2.6, “PSTRead”
If Unicode file format is to be used tick the check box. This support large files, 20GB. This option can only be used if using Outlook 2003 and higher. If not ticked a maximum size 2GB will be used. Click Next